Nitro Snowboard - T1 Wide 152
- Secure payment by card
- E-mail us, we reply swiftly!
- These rows can be edited \*
\* Edit these rows under Content > Product page
- Ability LevelIntermediate-Advanced
- BrandNitro Snowboards
- Camber/Hybrid/RockerCamber
- Men/Women/KidsMen
- Snowboard categoryFreestyle
- Snowboard length (cm)152W
- Snowboard widthWide
Description
Article no.: 833230-152W
Snowboard - Nitro T1 Wide 152
The T1 is Nitro's faithful servant in their Freestyle range and it has been for over 18 years. It is specificaly for those who spend a lot of time in the park!
The T1 is a Twin board which allows it to perform and ride equally well in both directions. It is equipped with Ureshred Sidewalls and Railkiller edges. These are reinforced and designed tougher to withstand the greater forces and stresses experienced when riding rails and boxes. The T1 is also agile on the piste thanks to its Cam-out Camber profile. The Whiplash core Profile also gives it plenty of pop and response.
The T1 is simply the ultimate park board for anyone who wants to hang out in the park and ride rails and other features. The board is waxed and tuned at the factory, ready for the mountain!
The T1 Wide is adapted for riders with larger feet (EUR 44+). A wider waist reduces the chance of the toes or heels catching in the snow during deep carves.
See the video below where Nitro presents the T1.
Rider:
Freestyle – the T1 is and always will be Nitros iconic park board. With a T1 you can devour everything in the park and then take a break doing butters and carves on the piste.
Freeride: 6/10
All Mountain: 8/10
Freestyle: 10/10
Flex: Park 5/10
Specifically tuned for park riding, this flex pattern is forgiving yet responsive; allowing you to take your riding to the next level on jumps and rails.
The scale is built on the principle that 1 is "Soft and Playful" while 10 is "Hard and Responsive".
Rider Level:
Average-Advanced
Shape:
Twin: The nose and tail are identical and the bindings are centered on the board. Same shape, flex and camber at both ends. This is so that you can ride equally well in both directions.
Radial Sidecut: The simplest and most common of all sidecuts: One single radius makes this sidecut extremely versatile and predictable.
Profile:
Cam-Out Camber: Our Cam-Out Camber is basically a Trüe Camber with early and smooth transitions into tip and tail. The result is a fun and responsive board that turns on the spot and is forgiving, even after that 713.5° landing!
Construction:
Powercore II: The Powercore II is a tip-to-tail poplar wood core with additional beech wood stringers for unrivalled strength, smooth response and insane snap.
Bi-Lite Laminates: Our rider-trusted Bi-Lite Laminates are engineered for unrivalled strength, powerful style and refined board- feel.
Sintered Speed Formula HD Base: Utilizing a new base material compound, we have been able to achieve higher abrasion resistance, increased wax absorption and higher on- snow speeds.
Whiplash Core Profile: This profile features reduced thickness between the inserts with added meat outside your feet for maximum ollie power, while maintaining a perfect press flex.
Railkiller Edge: Your secret weapon for rails, rocks and longevity! With its unique edge profile and an impact resistance of more than 200% compared to a standard edge – the Railkiller Edge is twice as thick and twice as strong. This proprietary construction can take on any rail challenge. Take a file to them or ride them hard and wear them down naturally, this chunk of steel has enough meat for years of abuse.
Ureshred Sidewalls: New on all Nitro park boards, we are introducing our URESHRED sidewall: Just like Skate wheels and bushings, these sidewalls are made from Polyurethane, which makes them highly resistant against impact and abrasion as well as giving them excellent dampening characteristics. Together with our exclusive Railkiller Edges, our URESHRED sidewalls provide the ultimate package of edge durability and feel.
Wax: All NITRO boards are factory-tuned with Kandahars 100% Natural Speed Wax, a fully Bio-degradable wax made of renewable resources.
Sustainability:
- Water-based incs for over 70% of all topsheets
- Wood from responsible sources (FSC certified)
- All edges are made of 50% recycled steel
- Over 85% of all running bases are made using recycled raw material
- The board factory is powered 100% by solar power
Specifications:
- Hole System: 2x4
- CORE: Powercore II + Bi-Lite Laminates
- BASE: Sintered Speed Formula HD Base
- Edges: Railkiller Edge
- SHAPE: Twin + Radial Sidecut
- Setback: 0mm
- Profile: Cam-Out Camber
- FLEX: Park 5/10
- Wide Width
- Sidecut: 7.8m
- Length: 152cm
- Running Length: 1040mm
- Waist Width: 260mm
- Recommended weight: 60-80kg
The T1 is Nitro's faithful servant in their Freestyle range and it has been for over 18 years. It is specificaly for those who spend a lot of time in the park!
The T1 is a Twin board which allows it to perform and ride equally well in both directions. It is equipped with Ureshred Sidewalls and Railkiller edges. These are reinforced and designed tougher to withstand the greater forces and stresses experienced when riding rails and boxes. The T1 is also agile on the piste thanks to its Cam-out Camber profile. The Whiplash core Profile also gives it plenty of pop and response.
The T1 is simply the ultimate park board for anyone who wants to hang out in the park and ride rails and other features. The board is waxed and tuned at the factory, ready for the mountain!
The T1 Wide is adapted for riders with larger feet (EUR 44+). A wider waist reduces the chance of the toes or heels catching in the snow during deep carves.
See the video below where Nitro presents the T1.
Rider:
Freestyle – the T1 is and always will be Nitros iconic park board. With a T1 you can devour everything in the park and then take a break doing butters and carves on the piste.
Freeride: 6/10
All Mountain: 8/10
Freestyle: 10/10
Flex: Park 5/10
Specifically tuned for park riding, this flex pattern is forgiving yet responsive; allowing you to take your riding to the next level on jumps and rails.
The scale is built on the principle that 1 is "Soft and Playful" while 10 is "Hard and Responsive".
Rider Level:
Average-Advanced
Shape:
Twin: The nose and tail are identical and the bindings are centered on the board. Same shape, flex and camber at both ends. This is so that you can ride equally well in both directions.
Radial Sidecut: The simplest and most common of all sidecuts: One single radius makes this sidecut extremely versatile and predictable.
Profile:
Cam-Out Camber: Our Cam-Out Camber is basically a Trüe Camber with early and smooth transitions into tip and tail. The result is a fun and responsive board that turns on the spot and is forgiving, even after that 713.5° landing!
Construction:
Powercore II: The Powercore II is a tip-to-tail poplar wood core with additional beech wood stringers for unrivalled strength, smooth response and insane snap.
Bi-Lite Laminates: Our rider-trusted Bi-Lite Laminates are engineered for unrivalled strength, powerful style and refined board- feel.
Sintered Speed Formula HD Base: Utilizing a new base material compound, we have been able to achieve higher abrasion resistance, increased wax absorption and higher on- snow speeds.
Whiplash Core Profile: This profile features reduced thickness between the inserts with added meat outside your feet for maximum ollie power, while maintaining a perfect press flex.
Railkiller Edge: Your secret weapon for rails, rocks and longevity! With its unique edge profile and an impact resistance of more than 200% compared to a standard edge – the Railkiller Edge is twice as thick and twice as strong. This proprietary construction can take on any rail challenge. Take a file to them or ride them hard and wear them down naturally, this chunk of steel has enough meat for years of abuse.
Ureshred Sidewalls: New on all Nitro park boards, we are introducing our URESHRED sidewall: Just like Skate wheels and bushings, these sidewalls are made from Polyurethane, which makes them highly resistant against impact and abrasion as well as giving them excellent dampening characteristics. Together with our exclusive Railkiller Edges, our URESHRED sidewalls provide the ultimate package of edge durability and feel.
Wax: All NITRO boards are factory-tuned with Kandahars 100% Natural Speed Wax, a fully Bio-degradable wax made of renewable resources.
Sustainability:
- Water-based incs for over 70% of all topsheets
- Wood from responsible sources (FSC certified)
- All edges are made of 50% recycled steel
- Over 85% of all running bases are made using recycled raw material
- The board factory is powered 100% by solar power
Specifications:
- Hole System: 2x4
- CORE: Powercore II + Bi-Lite Laminates
- BASE: Sintered Speed Formula HD Base
- Edges: Railkiller Edge
- SHAPE: Twin + Radial Sidecut
- Setback: 0mm
- Profile: Cam-Out Camber
- FLEX: Park 5/10
- Wide Width
- Sidecut: 7.8m
- Length: 152cm
- Running Length: 1040mm
- Waist Width: 260mm
- Recommended weight: 60-80kg